[email protected]
how many coats of clear before wet sanding

How Many Coats Of Clear Before Wet Sanding

wet-sanding prior to or after applying clear enamel ,wet-sanding prior to or after applying clear enamel? wash and clean the truck with soap and water, then with wax and grease remover. sand the gloss away on .how to sand and buff clear coat,step 1: soak the sandpaper step 2: wash your car step 3: begin to wet-sand the clear coat step 4: continue wet-sanding with higher grit .do you wet sand before or after clear coat?,make sure you wipe of the excess water regularly as you sand to minimise the chance of wet sanding marks in your paint. one may also ask, how .diy paint do i sand basecoat before clear or not and why ,if you plan on sanding after i would put at least 3 good coats of clear to lessen the (color coat), then you should wait until its completely dry, and wet sand off the not to over-do it this time- make sure not to paint too much and get runs again..

HOT PRODUCT

  • Do You Have To Scuff The Base Coat Before Painting The Clear

    Do You Have To Scuff The Base Coat Before Painting The Clear

    clear coat. wet-sand the base coat before starting the clear coat. wet sanding makes the surfaces smoother. it is often a step in polishing cars and other items.,do you sand spray paint before clear coat?,wet-sand the base coat before starting the clear coat. wet sanding makes the surfaces smoother. it is often a step in polishing cars and other 

    Get Price
  • Why You Shouldn'T Sand Between Coats On Touch Up Paint

    Why You Shouldn'T Sand Between Coats On Touch Up Paint

    thinking about sanding between coats on a touch up paint project? if you're having an issue with too much texture or getting runs in the paint, you may once primer is dry, you should sand the primer before moving on to the basecoat color. wet sanding and polishing the final layer will yield a better result than doing it ,should base coat be dry before clear?,should i wet sand clear coat? the clear coat should be wet-sanded with 400 grit sandpaper. this is to replace the orange peel with finer and finer 

    Get Price
  • Sanding Between Clear Coat. Wet Or Dry. Does It Matter

    Sanding Between Clear Coat. Wet Or Dry. Does It Matter

    i was reading about sanding between clear coats. like spray on 3 coats, let dry, then block sand with 600 and spray on a couple more. then cut ,wet sanding clear coat,hey guys, just applied first 2 coats of clear lacquer to my model car. how long do you usually leave the clear lacquer to dry before wet sanding?

    Get Price
  • How To Sand A Clear Coat Without Sanding The Paint

    How To Sand A Clear Coat Without Sanding The Paint

    soak a sheet of 1200-grit wet/dry sandpaper in water for 10 minutes. remove the sandpaper from the water and wrap it around a sanding block. sand by ,the best way to apply aerosol clearcoat touchupdirect,a wet coat is a heavy coat where you lay down a lot of paint in one pass so the surface looks 'wet'. be careful not to apply too much paint otherwise you can get a bumpy finish like that of an orange peel. and cause the clear to dry before it lands, resulting in a sandpaper-like finish. sanding are there dos and don'ts?

    Get Price
  • How Long Should I Wait Before Wet Sanding And Buffing

    How Long Should I Wait Before Wet Sanding And Buffing

    even if you used high temperature hardener for the clear, 48 hours is plenty of time. go easy on the sandpaper grit and let the compound to the ,polish a newly painted car,a note before you start; make sure your clear coat has properly cured. to carefully eliminate any of the more prominent nibs of paint of dust before wet sanding. do not put too much compound on the pad or you could burn through the paint.

    Get Price
  • How Many Coats Of Clear Coat Do You Apply?

    How Many Coats Of Clear Coat Do You Apply?

    for regular repair work with a high solids clear(i assume thats what you i have had better luck putting on 2 coats,sanding it flat and then applying 2 more coats. i do agree that cars do look sweet before they get sanded.,is 320 too coarse for sanding clear flat?,then apply additional coats of clear to cut and buff. my question is would 320 wet be too coarse to use on the flat part of panels after the initial with 320, i would refine that sanding scratch one more step before you clear. keep in mind that its much better and easier to not burn through, you dont really 

    Get Price
  • Wet Sanding Clear Coat ?'S

    Wet Sanding Clear Coat ?'S

    here is a pic before wet sanding. that was quick and looks good too! how much color and clear did you end up using for the whole car?,why isn't applying clear coat after wet-sanding or cutting ,if wet-sanding and cutting strips a layer of the clear coat, why isn't clear coat re-applied before polishing/waxing? much different than oem or cured clear and some of those guys would be lost (i think many have seen body 

    Get Price
  • Level Sanding The Clear Coats

    Level Sanding The Clear Coats

    i put about 9 coats of clear on this and then level sanded it. the question i have is how much should i level sand it before wet sanding and ,how much clear to lay down and how long to wait before wet ,your painter should understand if you discuss this with him. off the cuff, you're probably looking at the 4-6 coats of clear and assume that 2-3 will 

    Get Price
  • How Many Coats And How Long Should I Wait Between Coats Of

    How Many Coats And How Long Should I Wait Between Coats Of

    also, how long should i wait to clear coat and how many and also how to evaporate from the painted panel before the next coat is applied. i've seen mention of doing some wetsanding between some portion of the clear.,am i supposed to sand between coats???,after clear & waiting for cure go through your wetsanding up to 2000 grit. painting my cobra 10 years ago, above 1000 is doing pretty much nothing. i would recommend at least 6 clear coats before sanding and polishing.

    Get Price
  • Removing Orange Peel Before Clear Coating?

    Removing Orange Peel Before Clear Coating?

    if i notice orange peel before clear coating, i would think wet sanding is done before clear coating. if you are using base coat you can't sand on that, if you do you need to put thanks very much for getting back to me.,how many coats of clear before sand and buff?,it really depends how heavy you sprayed the clear, and how aggressive you get with the sanding. if you start with 1000 or finer and work your 

    Get Price
  • Wet Sanding And Reclearing.

    Wet Sanding And Reclearing.

    i would wet sand with 1500 grit spray about 4-5 coats of clear. then wet of the clear. it will tell you how many hours before you can do this.),do you sand orange peel before clear coat?,do the necessary wet sanding (unless you're using a metal flake paint) with high grits before the clear. how long can you leave base coat before 

    Get Price
  • Does Anyone Sand The Base Coat Before The Clear??

    Does Anyone Sand The Base Coat Before The Clear??

    you can 'nib' sand it but then always put a coat of paint over what you sand. some put a final sand before the last coat of color which gives a ,rattle can spray paint tips?,so before i take it to my body shop to have it professionally painted, i figured i'd i wasn't sure how much/heavy for each coat (base and clear) to actually apply. severe orange peel may require wet sanding with 1000-2000 grit in a straight 

    Get Price
  • Wet Sanding Clear Clean

    Wet Sanding Clear Clean

    yeah 2 coats should be fine. just depends on how deep your flaws are. just use a very light grit sandpaper. maybe 1500 and watch your corners.,wet sanding & buffing fresh clear coat,had a fender repainted with ppg deltron 2000 base and ppg shop-line jc630 clear coat. shop that painted tells me to wait a month before wet 

    Get Price

Latest News